SSK Aluminum USB 3.2 Gen 2 SATA NGFF SSD Enclosure 6Gbps Tool-free-SHE-C322
Standard: M.2 SATA NGFF Enclosure
Transfer speed: 6Gbps
Product Dimensions: 4.53"L x 1.54"W x 0.43"H
Product Description
1.This USB-C Gen 2 6Gbps M.2 SSD Enclosure supports only SATA-based M.2/NGFF (B Key & B+M Key) SSDs in sizes 2242, 2260, and 2280. It does not support NVMe/PCIe M Key SSDs. Please check your SSD label before purchasing. If it says 'PCIe' or 'NVMe,' this enclosure will not be compatible
2.Tool-Free: Tool-Free design allows quick and easy installation of your M.2 SATA SSD.Both side can be inserted; USB 3.2 Gen 2 6Gbps high speed transmission;Easy to use and portable.Capable of performance over 540MB/s read/write when using high performance SATA media
3.Aluminum Alloy Shell: Adopts aluminum alloy shell, slim design, and excellent heat dissipation, be portable and easy to carry;Note: SATA SSD is not included.
4.Blue Indicator: Blue Indicator shows the data transfer status, easy and clear;SSD file system must be supported on host operating system to be accessible. As with all SSDs, new media must be formatted before use.
5.Master Chip: Adopts high performance controller IC, Complies with UASP, Trim which can effectively improve the speed and extend the longevity of SSD, Plug-and-play compatibility Multi OS, Windows 7/ 8/ 8.1/ 10/ Linux/ MAC.
6.Please take care to check if your SSD is M.2 SATA NEFF otherwise it will not work.
SSK M.2 SATA SSD Enclosure adopts high performance controller chip(JMS580), up to 6Gbps high-speed data transmission. 1GB file only takes 2-3 seconds ; Complies with UASP, Trim which can effectively improve the speed and extend the longevity of SSD.
Attention: It supports SATA-based M.2/NGFF(B Key&B+M Key) SSD 2242 2260 2280mm solid state drivers, Not supports NVMe/PCIe M.2 M Key SSD! Before purchasing, please check your SSD label. If it prints PCIE, NVME, this enclosure will not support.
Tool-Free,No tool required
Interface type: M.2 SNGFF ATA to USB 3.1 Gen 2
Support SSD Drivers Size: 2242, 2260, 2280mm
Case Size: 115*39*11mm
Cable1: USB3.0 AM to USB C(150MM)
Cable2: Type-C adapter
Color: Grey+Black
Main Features
Easy Installation & Extreme Data Transfer
With USB 3.1 Gen2 interface,provides transfer speeds of up to 540MB/s,1GB file 2-3seconds. Backward compatible with USB 3.1 Gen2 and USB 3.0 up to 6Gbps.
For the brand new SSD, it may not be found, pls format it under disk management before the first time using.
Attention:Not compatible with MacBook original SSD
Thermal Pads included for Excellent Heat Dissipation
Everything you need in one package, included the thermal pad, you can paste it on SSD to achieve rapid heat dissipation.
Please tearing off one side of the protective sheet and stick it on the SSD first, without tearing off the protective sheet on the other side.
Supports B Key and B+M Key M.2 SATA SSD
The slot of Our M.2 SATA SSD case has a single notch B Key. It is not only supports B Key SATA SSD and also supports two notches B+M key SATA SSD. You can use it directly when you has two notches SATA SSD.
Compatible with NGFF M.2 SATASSDs
Not compatible with NVMe M.2 SSDs, or other M.2 non-SATAdevices
SATA SSDs use exceptionally high performance storage media that will run hot when under load.
Main Features
Fashion Design
Adopts aluminum alloy shell, Slim design, and excellent heat dissipation, be portable and easy to carry.It will be the best choice for trip and business travel.
Tool-free design and fastest USB storage speeds!
Tool-free design and no additional tools required. With two cables, USB A to C and USB C to C which suitable for all Host PC ports.
Capable of performance over 540MB/s read/write when using high performance SATA
Supports Plug & Play and Hot-Swapping.
Multi OS Compatible
Windows 7 or above, Mac OS 10.10.5 or above, Linux, and Type C Android Phones.Blue Indicator is always on when plug in, and flash when read or write data.Including the type-C adapter ，Convenient for you to use type-C mobile phone for transmission.
1. Please slid to open and take the middel frame out of the enclosure.
2. Place the SSD at and angle of 45 degress into the PCB.
3. Insert the fixing hole at the end of the M.2 SSD into the slot in the middle of screw B, insert screw A and tighten it. Otherwise, there will be large screws preventing the installation of the enclosure.
4. Put the thermal pad on the SSD,leave the sheet on the thermal pad.
5. Inserting in the direction of the arrow,the end with the hook goes slowly slide into the shell first. When you hear a bang, it means that it is locked
Note:
1. It supports SATA-based B Key (B+M Key) SSD only. It does NOT support PCI-E based M key and M+B key SSD; If need NVME PCIE based SSD Enclosure, pls purchase another model HE-C325 SHE-C326 from our Store. Thank you!
2. It is also not compatible with MacBook original SSD.
3. After installed, when the first time to use the new SSD, it may not be found, please partition and format it first under disk management, then it can be used normally. If want to work on both Mac and Windows OS, please format it to EXFAT.
Buy
